Peripheral Driven Rotary Bridge Scrapers

Linear Chain Scrapers

Linear Chain Scrapers are scrapers used in linear pools or channels. Scraper pallets are manufactured according to the pool width.

Scraper pallets are made of stainless material and a scraping tire is attached to them. Chains and gears can be made of stainless material according to the project, and our specially manufactured plastic gears and chains are preferred because they are resistant to corrosion, especially in scraper systems operating in corrosive environments.

Central Driven Rotary Bridge Scrapers

Rotary Bridge Scrapers are used in treatment plants to scrape the sludge that settles at the bottom of circular sedimentation tanks and to remove the foam or oil layer accumulated on the surface from the tank.

Rotary scrapers are divided into fixed bridge or rotating bridge scrapers. Depending on the project, bridges can be produced from carbon steel, epoxy painted, galvanized or stainless materials. The parts in contact with water can be produced from stainless material.

Central Driven Rotary Bridge Scrapers

Linear Bridge Scrapers

Linear Bridge Scrapers are used in treatment plants to scrape the sludge that settles at the bottom of the preliminary settling tanks and sand-oil retaining pools and to remove the foam or oil layer accumulated on the surface from the tank.

Depending on the project, bridges can be produced from carbon steel, epoxy painted, galvanized or stainless materials. The parts in contact with water can be produced from stainless material.

Sludge Thickener Scrapers

Sludge Thickeners are mixers used to thicken excess sludge in treatment plants and in sludge digestion systems. It can be produced with bottom or surface scraper depending on the purpose of use.